|
|
MAS-18
A massively
powerful sub cabinet that is properly tuned especially for the
Executioner X18 woofer that has a 4” copper clad aluminum
voice coil, 200oz. magnet and cast aluminum basket. This woofer can and will
handle 1000 watts RMS even though we only rate it at 750 watts
RMS.
With the aid of
top level design programs such as LMS and LEAP as well as
years of experience, the MAS18 cabinet was born for accurate
low frequency projection. Proper tuning eliminates the
possibility of port flutter and frequency doubling commonly
found in small or improperly tuned sub cabinets.
Built as strong
as an ox using 3/4” 13ply birch and braced on every panel.
This highly professional grade sub cabinet comes with a built
in 125hz 12db per octave high power crossover, steel hardware,
tripod mount on top, rubber feet on bottom and a jack plate
with dual ¼” locking and air sealed connectors as well as
dual speakon connectors all wired in parallel so you can daisy
chain to other cabinets.
- 13ply
3/4” Birch construction
- Braces
on every panel internally for maximum strength
- Latex
backed black carpet
- Dual
air sealed, locking 1/4" and dual 4pin
Speakon all wired in parallel
- Internally
mounted steel bar handles just behind rounded and
tucked Tolexed handle cutouts
- Down
Firing slot vented at the bottom
|
| Handling: |
750 watts |
| Peak Power
Handling: |
1500 watts |
| Ohms: |
8 |
| Frequency
Response: |
20 - 125hz |
| Sensitivity: |
100dB |
| Woofer: |
ExecutionerX 18 with 200oz.
magnet, cast aluminum basket and 4" copper clad
aluminum voice coil |
| Tweeter: |
N/A |
| Horn: |
N/A |
| Crossover: |
High power 12db per octave
designed at 125hz slope |
| Construction: |
13ply 3/4" Birch through
out. Braced on every panel. Dado jointed |
| Measurements: |
28 tall x 22 wide x 24 deep |
| Warranty: |
3 year |
| Weight: |
95 lbs (Packed)
90 lbs (Unpacked) |
| MSRP: |
$429 |
|
